Jinqu specializes in producing mufflers, SCR exhaust gas aftertreatment systems, and air reservoirs

The function of the GAC Hino E0313 air reservoir.

- Storage gas source: Store the compressed air generated by the air compressor to provide a stable air supply for vehicle braking systems, clutch assist systems, and other pneumatic equipment, ensuring these devices operate smoothly and reliably.

- Stable atmospheric pressure : Buffer and stabilize compressed air to prevent pressure fluctuations, ensuring stable operation of pneumatic equipment and enhancing the reliability and consistency of braking performance.

- Filter impurities Dust, moisture, and oil contaminants in the air settle and separate within the air receiver tank, providing an initial filtration effect that protects air-using equipment and extends its service life.

- Maintenance and Care

- Regularly drain water Water can accumulate inside the air reservoir; regularly opening the drain valve to release the water helps prevent freezing and blockage of the lines during winter, thereby avoiding brake system failure.

- Check the tire pressure : Regularly check the air pressure in the air reservoir to ensure it remains within the normal range. Pressure that is too low will impair braking performance, while pressure that is too high could damage the air reservoir and related equipment.

- Inspect components : Check whether components such as the safety valve, check valve, and drain switch are functioning properly. If any faults are found, replace them promptly to ensure the air reservoir operates correctly.

To address these troubleshooting issues, Golden Melody Company provides you with some solutions.

- Insufficient air pressure : Possible causes include a malfunctioning air pump, air leaks in the tubing, a damaged check valve, or leakage from the safety valve. It is necessary to inspect the air pump's operation, locate and repair any leaks in the tubing, and replace the faulty check valve or safety valve as needed.

- Atmospheric pressure rises slowly : It could be due to a decline in the air pump's performance, blocked pipelines, or an internal malfunction in the air reservoir. You can clean or replace the air pump, clear the blockages in the pipelines, and inspect and repair the air reservoir.

- Safety valve frequently vents pressure It could be that the safety valve is set at too low a pressure, the pressure-regulating device is malfunctioning, or there’s an abnormal increase in system pressure. In such cases, the safety valve pressure needs to be readjusted, the pressure-regulating device inspected and repaired, and the root cause of the system pressure anomaly identified and eliminated.

Key Words