Jinqu specializes in producing mufflers, SCR exhaust gas aftertreatment systems, and air reservoirs

Ouman 2061 Small Single-Port 5-Hole Iron Air Tank

Ouman Series China Ouman 2061 Small Single - 5-Hole The air storage cylinder primarily serves the following functions:

- Energy storage: Multiple systems in the vehicle—such as braking and horn operation—rely on compressed air. However, the amount of air pumped by the air compressor is often insufficient when used directly. To address this, an air reservoir tank stores the compressed air produced by the compressor, releasing it precisely when needed to supply these systems with adequate pressurized air, ensuring their smooth and reliable operation.

- Filtering: Dust, water molecules, and impurities like engine oil that may be present in the air—and potentially pumped into the system by the air compressor—can damage vehicle components if they enter the air lines. However, when compressed air briefly resides in the receiver tank, heavier particles such as dust, water droplets, and oil settle at the bottom of the tank due to their greater density compared to air, effectively filtering out these contaminants and minimizing their impact on the air system.

- Voltage Stabilization: The up-and-down movement of the air compressor piston causes unstable compressed air pressure in the air circuit. The air receiver tank allows this fluctuating air to first remain inside, stabilizing the pressure before releasing it as consistently pressurized air. This ensures that systems like braking can operate smoothly under stable air pressure, ultimately enhancing system performance and reliability.

- Cooling down: When outside air is compressed by an air compressor, its temperature rises. Higher temperatures reduce air density, which in turn affects storage capacity and hinders moisture condensation. A receiver tank can cool the compressed air, increasing its density and boosting storage efficiency. At the same time, this cooling process also promotes moisture condensation, making it easier to remove water through drainage operations.

Ouman 2061 Small Unit – Maintenance and Care Methods for the 5-Port Model

- Upholding Cultivation: Regularly check the air receiver tank for air leaks, including inspecting all connections, pipelines, and the tank body itself. Additionally, drain water periodically to prevent accumulated moisture from causing internal rust and corrosion, which could compromise the tank's performance and reduce its service life.

- Troubleshooting: If the air tank fault light is on, it could indicate a sensor issue—make sure the sensor remains clean, and replace it if damaged. Alternatively, the problem might be with the safety valve, which requires regular inspection and replacement as needed.

Key Words