Jinqu specializes in producing mufflers, SCR exhaust gas aftertreatment systems, and air reservoirs
Product Series
Contact Us
E-mail:
Phone/WeChat:
Address:
Hebei Hejian Economic Development Zone Migezhuang Industrial Park Huayang Street and Liumiao Road intersection 20 meters west
DOC Component - Carrier 266 x 102
DOC Component – Carrier 266102 Muffler refers to a component that integrates the DOC (Diesel Oxidation Catalyst) with a muffler, featuring a carrier dimension of 266 x 102.
Key application areas include:
- **Automotive Exhaust Treatment:** The DOC component effectively oxidizes harmful substances such as carbon monoxide (CO) and hydrocarbons (HC) in diesel engine exhaust, converting them into harmless carbon dioxide (CO₂) and water (H₂O). Meanwhile, the muffler helps reduce exhaust noise. This muffler, with its 266 x 102 carrier size, is suitable for various types of vehicles—particularly passenger cars and light commercial vehicles where stringent emissions and noise control standards are required.
- **Non-Road Mobile Machinery:** Equipment like excavators, loaders, bulldozers, and other construction machinery, as well as agricultural machines such as tractors and combine harvesters, generate both exhaust emissions and significant noise. The DOC component–carrier 266x102 muffler can be installed in the exhaust systems of these machines, delivering dual functionality by purifying exhaust gases and minimizing noise pollution.
- **Generator Sets:** Whether used in industrial production, commercial settings, or as emergency backup power sources, diesel generator sets must manage both their exhaust emissions and operational noise. This muffler effectively reduces noise pollution during generator operation, while the DOC’s catalytic action further lowers pollutant emissions, ensuring compliance with environmental regulations.
DOC Component - YM41D1 Muffler
The DOC component—YM41D1 catalytic muffler—serves the following purposes, has specific uses, and finds applications as follows:
- **Function**: By employing catalytic oxidation, it reduces emissions of carbon monoxide (CO), hydrocarbons (HC), and soluble organic fractions (SOF) from diesel engine exhaust. At the same time, its unique structural design effectively dampens noise, minimizing the acoustic disturbances generated by the exhaust system.
- **Applications**: Primarily used in diesel vehicle exhaust systems, this component helps lower pollutant emissions, optimize the combustion process, enhance fuel efficiency, and ensure stable engine operation. Ultimately, it contributes to emission reduction and environmental protection.
- **Usage**: Typically integrated into a wide range of diesel-powered equipment, such as excavators, bulldozers, wheel loaders, and other construction machinery. It is also suitable for material-handling vehicles powered by liquefied petroleum gas (LPG), gasoline, or natural gas.
2023-144-40L - Iron Gas Cylinder
The 2023-144-40L iron air receiver tank serves similar functions, purposes, and applications as a typical iron air receiver tank:
- **Energy Storage**: It stores a certain amount of compressed air, which can be quickly released when pneumatic equipment demands high gas output, thereby reducing the need for frequent compressor starts. This not only extends the compressor's lifespan but also lowers energy consumption.
- **Pressure Stabilization**: By buffering pressure fluctuations in the compressed air system, the tank helps maintain a steady system pressure, ensuring smooth operation of connected pneumatic devices.
- **Cooling and Moisture Removal**: After compressed air enters the tank, its temperature drops, causing moisture to condense into water droplets that settle at the bottom. Regular draining of this accumulated water improves the quality of the compressed air.
- **Noise Reduction**: The tank also provides some sound insulation, helping to minimize noise pollution from the compressed air system.
**Applications**:
- **Industrial Sector**: Supplies stable compressed air to various pneumatic devices, such as pneumatic tools in machinery manufacturing, jet looms in the textile industry, and filling machines in the food industry. It’s also widely used in pneumatic conveying systems and automated control applications.
- **Automotive Industry**: Stores compressed air to power critical systems like automotive braking systems, pneumatic seat adjustments, and air-powered doors and windows, ensuring reliable performance of these components.
- **Other Fields**: In agricultural production, it serves as a power source for farming machinery; in shipbuilding and marine engineering, it acts as an energy storage device; and in aerospace, it is used to store essential gases like oxygen, nitrogen, and compressed air required for aircraft and spacecraft operations.
2023-144-25L - Iron Gas Cylinder
The 2023-144-25L iron air receiver tank serves similar functions, purposes, and applications as typical iron air receivers:
- **Energy Storage**: It stores a certain amount of compressed air, which can be quickly released when pneumatic equipment demands high gas flow, thereby reducing the need for frequent compressor starts. This not only extends the compressor's lifespan but also lowers energy consumption.
- **Pressure Stabilization**: By cushioning pressure fluctuations in the compressed air system, the tank helps maintain a steady system pressure, ensuring smooth operation of connected pneumatic devices.
- **Cooling and Moisture Removal**: After compressed air enters the tank, its temperature drops, causing moisture to condense into water droplets that settle at the bottom. Regular draining of this accumulated water improves the quality of the compressed air.
- **Noise Reduction**: The tank also provides some sound insulation, helping to minimize noise pollution from the compressed air system.
**Applications**:
- **Industrial Sector**: Supplies stable compressed air to various pneumatic devices, such as pneumatic tools in machinery manufacturing, jet looms in the textile industry, and filling machines in the food industry. It’s also widely used in scenarios like pneumatic conveying and automated control systems.
- **Automotive Industry**: Stores compressed air to power critical systems in vehicles, including braking systems, pneumatic seat adjustments, and air-operated doors and windows, ensuring reliable performance of these components.
- **Other Fields**: In agricultural production, it serves as a power source for farming machinery; in shipbuilding and marine engineering, it acts as an energy storage device; and in aerospace applications, it is used to store essential gases like oxygen, nitrogen, and compressed air required for aircraft and spacecraft operations.
TD95A9360910-30 - Iron Gas Cylinder
The functions, uses, and applications of the TD95A9360910-30 iron air receiver tank are as follows:
**Functions:**
- **Energy Storage:** The tank stores compressed air pumped by the air compressor, meeting the high-demand air requirements of critical systems such as car brakes and horns. Often, the air volume produced by the compressor alone is insufficient, making energy storage via the receiver tank essential.
- **Filtration:** Impurities in compressed air—such as dust, water molecules, and even oil that may enter due to compressor malfunctions—gradually settle at the bottom of the tank because of their heavier weight, effectively filtering out these contaminants and reducing wear on vehicle components.
- **Pressure Stabilization:** The up-and-down movement of the air compressor’s piston causes fluctuations in the compressed air delivered to the vehicle’s pneumatic system. The receiver tank helps stabilize this airflow, ensuring a consistent output pressure for reliable operation.
- **Cooling:** Compressed air generated by the air compressor tends to increase in temperature. The receiver tank plays a role in lowering this temperature, improving gas storage efficiency while also aiding in the separation and removal of moisture.
**Uses and Applications:**
- **Automotive Industry:** Primarily used to store compressed air, providing a reliable power source for various automotive systems, including brake systems, pneumatic seat adjustments, and air-powered doors and windows. For instance, commercial vehicles like trucks and buses rely on the receiver tank to maintain stable air pressure in their pneumatic braking systems, ensuring safe and dependable braking performance.
- **Industrial Sector:** In industrial equipment that depends on compressed air as an energy source, the receiver tank serves to store and regulate compressed air supply. It helps manage peak air consumption demands, ensuring a steady and uninterrupted flow of air to pneumatic tools, valve controls, and other air-driven machinery.
Phone/WeChat:+8615033366555 8615383773971 8613832779997
Office telephone:+8615033366555 Whatsapp:8618833759108
E-mail:sales02@jinquqipei.com
Message consultation
Note: Please leave your contact information and our professionals will contact you as soon as possible!